- 您现在的位置：买卖IC网 > Sheet目录396 > B57261V2223J60 (EPCOS Inc)THERMISTOR NTC 22K OHM 5% SMD
Temperature measurement and compensation
B572**V2
SMD NTC thermistors, case size 0402 (1005)
Cautions and warnings General
See "Important notes" at the end of this document.
Storage
Store thermistors only in original packaging. Do not open the package prior to storage.
Storage conditions in original packaging: storage temperature 25 ° C ... +45 ° C, relative
humidity ≤ 75% annual mean, <95% maximum 30 days per annum, dew precipitation is
inadmissible.
Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the
packing material may be deformed or components may stick together, causing problems during
mounting.
Avoid contamination of thermistor surface during storage, handling and processing.
Avoid storage of thermistors in harmful environments like corrosive gases (SO x , Cl etc).
Use the components as soon as possible after opening the factory seals, i.e. the
polyvinyl-sealed packages.
Solder thermistors within the time specified after shipment from EPCOS.
For leaded components this is 24 months, for SMDs 12 months.
Handling
NTC thermistors must not be dropped. Chip-offs or any other damage must not be caused
during handling of NTCs.
Do not touch components with bare hands. Gloves are recommended.
Avoid contamination of thermistor surface during handling.
Bending / twisting leads
A lead (wire) may be bent at a minimum distance of twice the wire’s diameter plus 4 mm from
the component head or housing. When bending ensure the wire is mechanically relieved at the
component head or housing. The bending radius should be at least 0.75 mm.
Twisting (torsion) by 180 ° of a lead bent by 90 ° is permissible at 6 mm from the bottom of the
thermistor body.
Soldering
Use resin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 18
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
B57550G0104F000
THERMISTOR NTC 100K OHM 1% RAD
B58610T4600A001
PRESSURE SENSOR ABSOLUTE 1.6BAR
B58611K1100A001
PRESSURE SENSOR GAUGE 25MBAR
B58621H5820A046
PRESSURE SENSOR GAUGE 10000MBAR
B58621K1110A054
PRES SENSOR GAUGE 100MBAR PCB
BBA-519-A
MODULE RF AMP HI-POWER BROADBAND
BBS3002-DL-E
MOSFET P-CH 60V 100A SMP-FD
BC6110A14-IQQA-R
BC6-HEADSET
相关代理商/技术参数
B57261V2333J 60
制造商:TDK-EPC 功能描述:NTC THERMISTOR 0402 33K J60 B-4575 - Tape and Reel
B57261V2333J060
功能描述:热敏电阻 - NTC 0402 33K J60 B-4575 NTC Thermistor RoHS:否 制造商:EPCOS 电阻:10 kOhms 功率额定值:150 mW 容差:2 % 端接类型:Radial 系列:B57703M 工作温度范围:- 55 C to + 125 C
B57261V2333J60
制造商:TDK-EPC 功能描述:Thermistor NTC 33KOhm 5% 2-Pin 0402 Cardboard T/R 制造商:TDK-EPC 功能描述:NTC THERMISTOR 0402 33K J60
B57276K
制造商:EPCOS 制造商全称:EPCOS 功能描述:NTC thermistors for temperature measurement
B57276K 123A 24
制造商:TDK Epcos 功能描述:NTC THERMISTOR K 276/12 K/A 24 2% - Bulk
B57276K 123A 27
制造商:TDK Epcos 功能描述:NTC THERMISTOR K 276/12 K/A 27 2% - Bulk
B57276K 123A 28
制造商:TDK Epcos 功能描述:NTC THERMISTOR K276/12K/A28 - Bulk 制造商:TDK-EPC 功能描述:NTC THERMISTOR K276/12K/A28 - Bulk
B57276K 482A 7
制造商:TDK Epcos 功能描述:NTC THERMISTOR K 276/4.8 K/A 7 2% - Bulk